‘mode transceiver’ Tagged Posts

Icome IC-706MKIIG HF/VHF/UHF All Mode Transceiver

Icome IC-706MKIIG HF/VHF/UHF All Mode Transceiver Frequency range Receive Transmit 0.030 - 199.999 MHz* 400 - 470 MHz* 1.8 - ...

Icome IC-706MKIIG

HF/VHF/UHF All Mode Transceiver

Frequency range
Receive
Transmit

0.030 – 199.999 MHz*	400 – 470 MHz*
1.8 – 1.999 MHz*	3.5 – 3.999 MHz*
7.0 – 7.300 MH*	10.1 – 10.150 MHz
14.0 – 14.350 MHz	18.068 – 18.168 MHz
21.0 – 21.450 MHz	24.89 – 24.990 MHz
28.0 – 29.700 MHz	50.0 – 54.000 MHz*
144.0 – 148.000 MHz*	430.0 – 450.000 MHz*

* Varies according to version

Mode

USB, LSB, CW, RTTY (FSK), AM, FM, WFM (Rx only)

No. of Memory Channels

107 (99 regular, 6 scan edges, 2 call channels)

Antenna Connector

SO-239×2 (for HF/50 MHz and 144/430 MHz)/50?

Frequency stability

Less than ± 7ppm from 1 min. to 60 min. after power ON. After that rate of stability less than ± 1 ppm/hr. at +25 ^°C (+77^°F). Temperature fluctuations 0^°C to +50^°C (+32^°F to +122^°F) less than ±5 ppm.

Current Drain

Tx	Max	20 A
Rx	Standby	1.8A
	Max Audio	2.0 A

Temperature Range

-10°C to 60°C;
14°F to 140°F

Dimensions
(projections not included)

167(W) X 58(H) X 200(D) mm;
6⁹/₁₆(W) X 2⁹/₃₂(H) X 7⁷/₈(D) in

Weight (approx.)

2.45 kg (5 lb 6 oz)

CI-V connector

2 conductor, 3.5 (d) mm (¹/₈“)

ACC Connector

13 pin

Transmitter Icome IC-706MKIIG

Output Power

	SSB/CW/RTTY/FM	AM
HF/50 MHz	5 – 100 W	2 – 40 W
144 MHz	2.5 – 50 W	2 – 20 W
440 MHz	2 – 20 W	2 – 8 W

Modulation System

SSB

Balanced modulation

Low level modulation

Variable reactance modulation

Spurious Emissions

Below 47.5MHz

47.5-50MHz

Above 50MHz

Less than -60 dB

-50 to -60 dB

-60 dB

Carrier Suppression

More than 40 dB

Unwanted Sideband

More than 50 dB

MIC Connector

8 pin modular jack (600?)

KEY connector

3-conductor 6.35 (d) mm (¹?₄?)

RTTY connector

3-conductor 3.5 (d) mm (¹?₈?)

Receiver Icome IC-706MKIIG

Receiving system

SSB/CW/AM/WFM

Double superheterodyne

Triple superheterodyne

Intermediate frequencies

(Unit: MHZ)

	1st	2nd	3rd
SSB/AM-N/FM	69.0115	9.0115	0.455*
CW	69.0106	9.0106	—
RTTY	69.0105	9.0105	—
AM/FM-N	69.0100	9.0100	0.455*
WFM	70.7000	10.7000	—

*FM only

Receive sensitivity

(preamp on; except 4-4.5 and 8-9 MHz)

	SSB/CW 10 dB S/N	AM 10 dB S/N	FM 12 dB SINAD	WFM 12 dB SINAD
0.5-1.8 MHz	-	13µV	-	-
1.8-28 MHz	0.15µV	2.0µV	0.5µV	-
28.0 – 29.7	0.15µV	2.0µV	0.5µV	-
50.0 MHz band	0.12µV	1.0µV	0.25µV	-
76-108 MHz	-	-	-	10.0µV
144/440 MHz band	0.11µV	1.0µV	0.18µV	-

Squelch Sensitivity (threshold)

SSB

Less than 5.6 µV

Less than 0.3 µV

Selectivity (normal)

SSB, CW, RTTY

AM/FM-N

More than 2.4 kHz/- 6 dB

Less than 4.8 kHz/ -60 dB

More than 8.0 kHz/-6 dB

Less than 30 kHz/-36 dB

More than 12 kHz/-6 dB

Less than 30 kHz/-60 dB

Spurious and Image Rejection
HF bands
50 MHz
144/430(440) MHz

More than 70 dB
More than 65 dB (except IF through)
More than 65 dB

Audio output power

More than 2.0 W (at 13.8 V DC)

RIT Variable Range

±9.99 kHz

PHONES connector

3-conductor, 3.5 (d) mm (¹?₈?)/8?

External SP Connector

2-conductor, 3.5 (d) mm (¹?₈?)/8?

The IC-706MKIIG meets MIL-STD requirements and strict environmental standards for shock (MIL 810C, D, E) and vibration (MIL 810C, D, E).

All stated specifications are subject to change without notice or obligation.

Supplied Accessories

Hand Microphone
RTTY Key Plug
DC Power Cable
Electronic Keyer Plug
Spare Fuses
ACC Cable