The IC-9100 contains years of advanced Icom technology in a compact, all-in-one HF/VHF/UHF transceiver. This radio covers most ham bands and modes, and provides a wide variety of operating styles. Whether you’re working DX QSO, RTTY, D-STAR DV, satellite or even moonbounce, Icom’s years of technological experience is working right along with you.

Multiple-band, multiple-mode

HF to 1200MHz Mutli-band in one transceiver

The IC-9100 fully covers the HF/50, 144, 430/440 amateur bands in multiple modes. By installing the optional UX-9100 1200MHz band unit, you can be operational on the 1200MHz band immediately.

ndependent dual receivers

The IC-9100 has two independent receivers in one radio and receives two different bands simultaneously (See the right table for available main and sub band combinations). In addition, the main and sub-band audio can be controlled with independent volume and squelch knobs, and received audio can be heard separately when external speakers are connected.

Satellite mode operation

The satellite mode synchronizes the uplink (transmitting) and downlink (receiving) frequencies, and tracks the frequencies in the same tuning step. This function matches both normal and reverse mode satellites. Compensation of the Doppler effect can be performed easily. 20 alphanumeric satellite memory channels store frequencies, mode and tone settings for quick set-up.

Optional D-STAR DV mode (Digital Smart Technology for Amateur Radio)

The optional UT-121 provides D-STAR DV mode digital voice and low speed data communications. Linking of D-STAR repeaters over the Internet allows you to communicate virtually anywhere. In addition to 144MHz, 430/440MH and 1200MHz band, the D-STAR DV mode can be used in 28MHz and 50MHz band simplex mode.

• D-STAR DR mode operation makes it easy to acess D-STAR repeaters
• GPS position reporting functions (External GPS receiver can be connected via data 1 connector. Also, position data can be entered manually.)
• One-touch reply function
• Digital call sign squelch
• Received call sign record
• Automatic received message display

RTTY demodulator and decoder

The built-in RTTY demodulator and decoder allow you to instantly read an RTTY message on the display. No external units or PC required. The built-in tuning indicator visually helps in critical tuning.

General
Frequency coverage*1
*1Showing USA version only.

Some frequency bands are not guaranteed
Rx 0.030 – 60.000*2 136.000 – 174.000*2
Rx 420.000 – 480.000*2 1240.000 – 1320.000*2*3
Tx 1.800 – 1.999 3.500 – 3.999
Tx 5.255 – 5.405*2 7.000 – 7.300
Tx 10.100 – 10.150 14.000 – 14.350
Tx 18.068 – 18.168 21.000 – 21.450
Tx 24.890 – 24.999 28.000 – 29.700
Tx 50.000 – 54.000 144.000 – 148.000
Tx 430.000 – 450.000 1240.000 – 1300.000*3
*2 Some frequency bands are not guaranteed. *3 With optional UX-9100.
Mode
USB, LSB, CW, RTTY (FSK), FM, AM*, DV (with UT-121)
(* Transmit: HF/50MHz only; Connect receive on 1200MHz band))
Frequency stability Less than ±0.5 ppm (0°C to +50°C)
Number of memory channels 396 Ch*5 (99 Ch for each HF/50, 144, 430/440, 1200MHz band)
4 Call Ch*5 (1 Ch for each band)
24 Scan edges*5 (6 Ch for each band)
20 satellite memories and 26 GPS memories
Operating temperature range 0°C to +50°C; +32°F to +122°F
Power supply requirement 13.8 V DC ±15%
Current drain (at 13.8 V DC)
Tx Max. power 24A, 9.0A (1200MHz with UX-9100
Rx Max Audio 4.5A, 5.5A (1200MHz with UX-9100)
Dimensions (W × H × D)
315 × 116 × 343 mm
1213/32 × 49/16 × 131/2 in.
Weight (approx.)
UX-9100 11 kg; 24.3 lb
950g; 2.1lb
Antenna connector
VHF
UHF
HF/50MHz SO-239 (50?) ×2
144MHz SO-239 (50?)
430/440MHz Type-N (50?)
1200MHz (with UX-9100) Type-N (50?)
Transmitter
Modulation System
SSB
AM
FM
DV (UT-121)

Digital PSN modulation
Digital Low power modulation
Digital Phase modulation
GMSK Digital Phase modulation
Output power (cont. adj.)
HF/50 Mhz

144 MHz
430/440 MHz
1200MHz (With UX-9100)

2-100W (SSB/CW/RTTY/FM/DM)
2-25W (AM)
2-100W (SSB/CW/RTTY/FM/DV)
2-75W (SSB/CW/RTTY/FM/DV)
1-10W (SSB, CW, RTTY, FM, DV)
Spurious emission
1.8—29.995MHz
50MHz/144MHz
430/440MHz
1200MHz (with UX-9100

Less than -50 dB
Less than -63 dB
Less than –61.8 dB
Less than –53 dB
Carrier suppression More than 40 dB
Unwanted sideband
1200MHz (With UX-9100) More than 55 dB
More than 40dB
Microphone connector 8-pin connector (600?)

Receiver
Intermdiate frequencies
HF/50MHz
144MHz
430/440MHz
1200MHz (With UX-9100)

64.455MHz, 36kHz
10.850MHz, 36kHz
71.250MHz, 36kHz
243.950MHz, 10.950MHz, 36kHz
Sensitivity
SSB, CW
AM
FM
DV
0.5–1.8MHz*1 1.8–29.9MHz*1 50–54MHz*2 144/440MHz 1200MHz
— 0.16?V 0.13?V 0.11?V 0.11?V
12.6?V 2.0?V 1.6?V 1.4?V –
— 0.50?V (28-29.7) 0.32?V 0.18?V 0.18?V
— 1.0?V (28-29.7) 0.63?V 0.35?V 0.35?V
* SSB/CW, AM: 10dB S/N, FM: 12dB SINAD, DV: 1% BER 1 Preamp1 ON. *2 Preamp2 ON.
Selectivity
SSB
(BW: 2.4kHz, sharp)
CW
(BW:500Hz sharp)
RTTY (BW: 350Hz sharp)

AM (BW: 6kHz)

FM (BW: 15kHz)

DV (12.5kHz channel spacing)
1200MHz (With UX-9100)
SSB, CW
FM

More than 2.4 kHz/-6dB;
Less than 3.4 kHz/-40 dB
More than 500 Hz/-6dB;
Less than 700 Hz/-40 dB
More than 500kHz/-6dB
Less than 800 Hz/-40 dB
More than 6.0 kHz/-6 dB
Less than 10.0 kHz/-40 dB
More than 12.0 kHz/-6 dB
Less than 22.0 kHz/-40 dB
More than -50 dB

More than 2.3kHz/-6 dB
More than 15.0kHz/-6 dB
Spurious and image rejection ratio
HF/50MHz
144/440MHz
1200MHz (with UX-9100)

More than 70dB
More than 60dB
More than 50dB
Audio output power
More than 2.0 W at 10% distortion with an 8 ohm load
EXT SP connector
2-conductor 3.5 (d)mm (1?4″)?8?

FT DX 5000 HF/50 MHz 200W Transceiver Series
FT DX 5000 HF/50 MHz 200W Transceiver Series

The FT DX 5000 Series HF/50 MHz 200 Watt Transceivers are a new Premium Class of Yaesu radios with 2 Independent Receivers plus many unique options and accessories designed to meet the Performance Requirements of even the most demanding serious Amateur Radio operator.

FT DX 5000 Brief Description
SM-5000 Station Monitor – Optional; 300 Hz Roofing Filter – Optional; ±0.5ppm TXCO – Included.
FT DX 5000D Brief Description
SM-5000 Station Monitor – Included; 300 Hz Roofing Filter – Optional; ±0.5ppm TXCO – Included.
FT DX 5000MP Brief Description
SM-5000 Station Monitor – Included; 300 Hz Roofing Filter – Included; ±0.05ppm OCXO – Included.
Rugged 200 Watt Output Power
The FTDX 5000 robust and high-power Final Amplifier Stage incorporates two super reliable FET, VRF-150 (Drain-Source Voltage 170 V/Gate Source Voltage ±40 V, Total Device Dissipation 300 W) in a push-pull configuration, offers solid 200 W output (75 W Class A operation).
Internal Power Supply
All three FTDX 5000 Series radios have their own built-in power supply
TWO Totally Independent Receivers
All FTDX 5000 Transceivers include Two (2) Totally Independent Receivers to give you Performance and Flexibility previously only provided by much more expensive radios.
SUPERB 3rd-Order Dynamic Range & 3rd-Order Intercept Point (IP3)
SSB (2.4kHz BW)
10 kHz SEP.:106 dB, IP3 +40 dBm

CW (500Hz BW)
10 kHz SEP:112 dB, IP3 +40 dBm
2 kHz SEP. :105 dB, IP3 +36 dBm
1 kHz SEP. : 99 dB, IP3 +25 dBm

*VFO-A/Main Receiver @ 14 MHz, IPO1

Super Sharp “Roofing” Filters
Super sharp “Roofing” filters for VFO-A/Main Receiver.
Filters are Selectable between *300 Hz, 600 Hz, 3 kHz (6-pole crystal filter), 6 kHz, 15 kHz (4-pole MCF)

*300 Hz filter is optional for FTDX 5000 and FTDX 5000D. It is included in the FTDX 5000MP
High Performance Yaesu Custom-designed 32-bit Floating Point DSP
The legendary high performance Yaesu Custom-designed 32-bit Floating Point DSP based on the TI TMS320C6727B (@300 MHz), one EACH for VFO-A and VFO-B.
Variable CW Audio Peak Filter & High/Low-Cut Filtering
Variable CW Audio Peak Filter, and High/Low-Cut filtering created through the very latest in DSP technology.

- CW Width: 50/100/150/200/250/300/350/400/450/500 Hz

- CW Pitch Frequency: 300~1050 Hz (10 Hz Steps)
True Analog Meter Precision
Enjoy the same Huge Size Metering System as the FT DX 9000 series with True Analog Precision and Instant Reaction Time.
New Function Displays for Ease of Operation
Three Electro Luminescence clear Displays included for easier operation and control of the Sub-Frequency, Graphical Wave and Menu function.
IF Output Available
IF Output (9 MHz) from VFO-A/Main Receiver
Practical Level Indication System for Most Important Settings
The FTDX 5000 provides loads of practical Level Indication that clearly show settings of Mic-Gain / RF Power / CW-Pitch / Keyer Speed / Processor Level / VOX Delay Time / Break-In Delay Time.

-They can be controlled ON/OFF independently!
Introducing the SM-5000 Station Monitor Bandscope
If you need a good Bandscope to enhance your operations, you are going to love our all-new SM-5000 matching station monitor. Included with the Bandscope is a complete, enhanced stereo speaker system with superb audio quality – the speakers are point at you instead of up into the air above the radio!
Other Valuable Options
- Yaesu Data Management Unit DMU-2000, and utilize its powerful Audio Scope, Oscilloscope, Spectrum Scope, logging, and Rotator Control capabilities using your own personally selected and purchased computer display monitor.
- Yaesu External Fully-Automatic Micro-Tuning Units. Three modes available: A (160 m Band), B (80 & 40 m Bands), C (30 & 20 m Bands)