MbotenGaptek Menu Service Code TV

TOSHIBA: PRESS MUTE IN REMOTE
ONCE, AND THEN CLICK AGAIN
HOLD THE MENU + MUTE TV.ULANGI
PROCESS FOR THE NEXT
PUSH-PUSH MENU diremote
FIGURES 4,7,2,5
PRESS VOL (-) IN-PRESS AND TV
HOLD NUMBER 9
SANYO: MENU ON REMOTE VOLUME +
UP
LG FLATRON: PRESS OK diremote
+ OK or MENU ON REMOTE + TV
MENU ON TV
TCL: PRESS DISPLAY (OSD)
Diremote + VOLUME DOWN IN
TV, hold 3 seconds
POLYTRON: POSITION TV standby,
PRESS AND HOLD MENU IN REMOTE
TV TO TURN ON THE INPUT
CODE NUMBERS 1013.
PANASONIC: SHORT (connect time)
PIN ‘FA-1′ TO ‘FA-2′ OR TP-8 TO
GROUND
PANASONIC TX SERIES: PRESS VOL (-)
DI TV + OSD
SHARP: SHORT LEGS (PIN) PIN 6DAN
7SESAAT IN IC MCU (TDA
98XXX). TO EXIT SHORTKAN
BACK
SHARP EXPRESSION: CONNECT
Pinch OR TWO WIRE / JUMPER
J800 (ADA next TUNER) D
PCB-HOLES AND HAS PROVIDED
JUMPER TWO PARALLEL.
CRYSTAL: POSITION TV standby, CLICK
VOLUME UP + DOWN ON VOLIME
TV SIMULTANEOUSLY AND HOLD hinga
ON TV
PHILLIPS: POSITION TV standby, CLICK
0,6,2,5,9, MENU
Akari: SLEEP IN PRESS + REMOTE
TV MENU
SAMSUNG: POSITION IN PRESS STANDBY
REMOTE: MENU-PSTD – MUTE -
POWER ON
SAMSUNG Plano: STANDBY POSITION,
PUSH IN REMOTE: DISPLAY-MENU-
MUTE-POWER ON
Plano DIGITAL SAMSUNG HD100:
STANDBY-DISPLAY-MENU-MUTE-
POWER
OR: STANDBY-MUTE-1-8-2-POWER
ON
AKIRA, FUJITEC, Boomba:
AND SOME ARE BRAND CHINA
OTHER USE D ICs
LC8632XX TYPE PROGRAM SERIES:
REMOTE IN PRESS MENU twice -
RECALL (Q. VIEW) – MUTE.
TV CHINALAINNYA
(KCL, MITOCHIBA, BAZZOMBA) PRESS
VOLUME IN TO TV NOL.TEKAN
RECCAL ONCE IN REMOTE, PRESS
AND HOLD VOLUME (-) IN TV
SIMULTANEOUSLY WITH THE PRESS
RECALL BACK IN REMOTE re ..
process to enter the sub
The next menu to the position
exit service menu.
AIWA: MENU BUTTON serve
THERE IN REMOTE IN THE ABOVE
VOLUME BUTTON (+), unloading
NOTICE.
JVC: PRESS AND HOLD SIMULTANEOUSLY
+ MUTE OSD
PRESS AND HOLD OR OSD
+ PICTURE
HITACHI: PRESS AND HOLD BUTTON
Avdi TV, ON POWER SWITCH
TV
SONY: STANDBY-OSD – 5-VOL (-) -
POWER ON
RCA / THOMSON: PRESS AND HOLD
VT + TV BUTTON ON POWER SWITCH
ON TV
Some brands also exist CHINA TV
who serve on the menu button
in remote orsinilnya
PHILLIPS: POSITION TV standby, CLICK
0,6,2,5,9, MENU
Akari: SLEEP IN PRESS + REMOTE
MENU
SAMSUNG: POSITION IN PRESS STANDBY
REMOTE: MENU-PSTD – MUTE -
POWER ON
SAMSUNG Plano: STANDBY POSITION,
PUSH IN REMOTE: DISPLAY-MENU-
MUTE-POWER ON
Plano DIGITAL SAMSUNG HD100:
STANDBY-DISPLAY-MENU-MUTE-
POWER
OR: STANDBY-MUTE-1-8-2-POWER
ON
AKIRA, FUJITEC, Boomba:
AND SOME ARE BRAND CHINA
OTHER USE D ICs
LC8632XX TYPE PROGRAM SERIES:
REMOTE IN PRESS MENU twice -
RECALL (Q. VIEW) – MUTE.
TV CHINALAINNYA
(KCL, MITOCHIBA, BAZZOMBA) PRESS
VOLUME IN TO TV NOL.TEKAN
RECCAL ONCE IN REMOTE, PRESS
AND HOLD VOLUME (-) IN TV
SIMULTANEOUSLY WITH THE PRESS
RECALL BACK IN REMOTE re ..
process to enter the sub
The next menu to the position
exit service menu.
AIWA: MENU BUTTON serve
THERE IN REMOTE IN THE ABOVE
VOLUME BUTTON (+), unloading
NOTICE.
JVC: PRESS AND HOLD SIMULTANEOUSLY
+ MUTE OSD
PRESS AND HOLD OR OSD
+ PICTURE
HITACHI: PRESS AND HOLD BUTTON
Avdi TV, ON POWER SWITCH
TV
SONY: STANDBY-OSD – 5-VOL (-) -
POWER ON
RCA / THOMSON: PRESS AND HOLD
VT + TV BUTTON ON POWER SWITCH
ON TV
TOSHIBA: PRESS MUTE IN REMOTE
ONCE, AND THEN CLICK AGAIN
HOLD THE MENU + MUTE TV. Repeat
PROCESS FOR THE NEXT
PUSH-PUSH MENU diremote
FIGURES 4,7,2,5
PRESS VOL (-) IN-PRESS AND TV
HOLD NUMBER 9
SANYO: MENU ON REMOTE +
VOLUME UP TV
LG FLATRON: PRESS OK diremote
+ OK or MENU ON REMOTE + TV
MENU ON TV
TCL: PRESS DISPLAY (OSD)
Diremote + VOLUME DOWN IN
TV, hold 3 seconds
PHILLIPS: POSITION TV standby, CLICK
0,6,2,5,9, MENU
POLYTRON: POSITION TV standby,
IN THE PRESS AND HOLD MENU
REMOTE TO TURN ON TV
INPUT CODE NUMBERS 1013.
PANASONIC: SHORT (conn
Moment) PIN ‘FA-1′ TO ‘FA-2′ OR
TP-8 TO GROUND
PANASONIC TX SERIES: VOL PUSH
(-) + DI TV OSD
SHARP: SHORT LEGS (PIN) 6 AND
Shortly PIN 7 ON IC MCU (TDA
98XXX). TO EXIT SHORTKAN
BACK
SHARP EXPRESSION: CONNECT
Pinch OR TWO WIRE / JUMPER
J800 (ADA next TUNER) D
PCB-HOLE HAS BEEN PROVIDED
JUMPER AND TWO PARALLEL.
CRYSTAL: POSITION TV standby, CLICK
VOLUME UP + DOWN ON VOLIME
TV SIMULTANEOUSLY AND HOLD hinga
ON TV
.
Akari: SLEEP IN PRESS + REMOTE
TV MENU
SAMSUNG: POSITION PUSH STANDBY
IN REMOTE: MENU – PSTD – MUTE -
POWER ON
SAMSUNG Plano: STANDBY POSITION,
PUSH IN REMOTE: DISPLAY-MENU-
MUTE-POWER ON
Plano DIGITAL SAMSUNG HD100:
STANDBY-DISPLAY-MENU-MUTE-
POWER
OR: STANDBY-MUTE-1-8-2-
POWER ON
.
AKIRA, FUJITEC, Boomba:
AND SOME ARE BRAND CHINA
OTHER USE D ICs
LC8632XX TYPE PROGRAM SERIES:
REMOTE IN PRESS MENU twice -
RECALL (Q. VIEW) – MUTE.
OTHER CHINA TV
(KCL, MITOCHIBA, BAZZOMBA)
PRESS VOLUME UP ON TV
NOL.TEKAN RECCAL IN REMOTE
ONCE, PRESS AND HOLD VOLUME
(-) IN SIMULTANEOUSLY WITH TV
PRESS BACK IN RECALL
REMOTE repeated the process ..
to go to sub menu
next to the exit position
service menu.
AIWA: MENU BUTTON serve
THERE IN REMOTE IN THE ABOVE
VOLUME BUTTON (+), unloading
NOTICE.
JVC: PRESS AND HOLD
SIMULTANEOUSLY + MUTE OSD
PRESS AND HOLD OR OSD
+ PICTURE
HITACHI: PRESS AND HOLD
Avdi TV BUTTON, ON
POWER SWITCH TV
SONY: STANDBY-OSD – 5 – VOL (-) -
POWER ON
RCA / THOMSON: PRESS AND HOLD
VT + TV BUTTON ON POWER SWITCH
ON TV
. TV SAMSUNG ‘CS 29 Z 70 MN Slim
- Press the STBY power + menu + info
rather long and press mute + power
on and use the navigation buttons
top down, left and right to
move the sub menus and adjustmen.
or by other means ie
Press STBY-slee + help + + power on
. TV DIGITEC Polytron
- In remote coneksikan / in
shortkan pin 13 and pin 14 or 16
on the remote control ic.
. AKIRA TV
In akira tv for service
how diverse
Depending on the model of chassis
in use it include:
- IC MCon. Toshiba TMPA 8821
PSNG
how, among others:
- Press the vol min to zero
- Press the display ‘it out “S
‘Then use the navigation or
the upper left and right arrow
down on the remote for the process
adjusment.
- IC and IC 37 160 M MCon Croma M
61 266 do include:
- Press the vol min until
zero, then press “menu and then
press code ’6483 ‘and press
‘Display for the exit.
or in other ways, namely:
- Press the mute + sleep + pp and test
press the numbers 1 through 9 and mute
Adjustment to factory mode.
- IC 863328B MCon LC and LA
76810A/18A
- Press the menu 2x then ‘ch
view / quick view + mute or time
to select or move
the page.
- IC MCon ST 92 T 195 D 702 and
STV 2248C
- Press’ menu on the remote and av
on the control panel
- Press + to choose prog
page
- Press the vol + for setting
jusment value.
-IC MCon / Croma TDA 9384
- Press the + clock pm, then
‘Time, after which the input number 0
to 9 to select a page
and ‘vol + – to adjust
value, and press’ display for
exit / end.
. LG TV
- Press the two buttons simultaneously
namely: “OK on the remote and” OK
on the panel tv, or other means, namely:
- Press ‘menu on the remote and’ menu
on a panel at the tv.
. TV Polytron
- Position tv STBY
- Press and hold the ‘menu on the remote,
until the TV turns on. Then
access code numbers 1-0-1-3
. Panasonic TV
- Short pin 1 and fa-fa-2 or TP-8
to ground
. TV Panasonic TX series
- Press the vol – in control panel + tv
OSD
. Sharp TV
- Short pin 7 on the ic mcu 6dan TDA
9381 PS/N1/XXX
or take a look at the chassis pcb holes
small at the left edge there
jumper the two parallel, it is in
shortkan. Except for sharp tv
the old model, Q Beat in
ie near the tuner selector swith.
. TV Cristal
- TV on the STBY position
- Press vol up vol down + a
simultaneously, then hold
until the tv on, or
- Press the vol min: 0, press vol + and
simultaneously on a vol-panel tv
for 3 seconds.
- For .29 on tv remote, pin 14
There are no swithnya.
. Philips TV
- Position tv STBY
- Press the number: 0 -6-2-5-9 and
the menu. or
- Press the numbers: 0-6-2-5-9-6 +
display, press ’1 -2-3.
- Press the number 5-8-0-0 transform and model
other.
. Akari TV
- Press’ sleep on the remote and
‘Menu on the control panel tv.
. TV Hitachi, Hitachi Praise Singer
- Press and hold the AV, in
panel tv, then turn
‘Power on / off swith.
This method is usually made chassis V2
term, for other models chassis
using a remote master.
. Sony TV
- Position vol min
- Press the STBY, press the number 5 and
power on the remote, up factory
mode
- Press 1-5 to move
page
- Press 4-6 to change the value
Adjustment, and hit the stores for
store the data that we have
just.
. JVC TV
- Press and hold simultaneously
OSD / + Display Menu or OSD /
+ Picture diplay.
. Aiwa TV
- In the remote in the open, the top
the ‘vol +
. TV Thomson / RCA
- Press the button on the panel tv + vt
power on swith tv.
. Samsung Slim TV ‘CS 29 Z 30 MN
- Press the STBY + info + menu + mute
+ Power on the RC.
. Samsung Plano TV
- Press the STBY + + + menu display
mute + power on.
. Samsung’s HD digital Plano 100
- Press the STBY + + + menu display
mute + power on or ‘mute, press
number 1 – 8-2 + power display.
One of the service menu code
for Changhong TV is
as follows:
placing the tv to the
minmum or nol.Tekan
MUTE button on the remote
and hold, press MENU on the
tv. will arise logo settings
(S).
Get used before changing
parameter setting, record
once all data
the original before you
fox, to prevent
fault settings
the parameters.
If the TV is locked on the conditions
CHILD LOCK, press the menu
until it snaps into position
SYSTEM, then press the
or help (?) to enter
to the position of PARENTAL
GUIDE.masukan code: 6688
through the remote, change or
turn off the setting PARENTAL
GUIDE to the OFF position
Other Post MbotenGaptek :

• DIAMOND F23-3X5/8 FALI 145MHZ Antena
• SILICON NPN RF POWER TRANSISTO
• Frost Alarm

Fujitsu Thermal Printer FTP-62D Fujitsu Components is an established thermal printer manufacturer renowned for more than 20 years for its high quality thermal print mechanisms. Through continued research Fujitsu is able to develop new printers that are adapted to the requirements of the market. Fujitsu Components is proud to present its latest thermal printer development; the FTP-62D thermal print mechanism. This printer is designed from a customer’s point-of-view and shows remarkable capabilities.

The brand new FTP-62D is an answer to the market demand for a space-saving printer. The compact printer is a direct evolution of the current FTP-628 Fujitsu printer family.

The FTP-62D print mechanism is designed to accommodate paper rolls partially inside the printer module allowing small and compact designs. The inclusion of the paper roll results in a space saving design, saving up to 8mm in height compared to a conventional printer design, and without compromising on functionality.

The performance and capability of this small-profile printer stand out. The FTP-62D supports high-speed printing up to 100mm/s at 9.5V and is capable of handling large paper rolls in a minimum possible space.

This portable printer has a compact size of 69.4mm (W) x 46mm (D) x 19mm (H) and weighs no more than 37 g.

The head pressure is controlled by a new innovative spring design, which combines several functions, such as:

• Stable head pressure for perfect print results.
• Earthing the thermal head, preventing damage due to ESD.
• Low mounting height.

The printer offers a printing life of minimum 100 million pulses/50km and has label printing capabilities.

The FTP-62D is suitable for a wide variety of printing purposes and applications; from label printing (straight paper path) to integration in POS systems. source