RESETTER CANON MP: MP150, MP160, MP170, MP180, MP450, MP460.

sponsored links

Posted in category: Free Download Softwere at: May 21, 2010 by nuG

Recently, resetter canon printer for the type of MP: MP150, MP160, MP170, MP180, MP450
Facilities are also decent, could be used to reset the black ink-colored or separately, to reset waste ink counter, and is also used to backup the EEPROM printer (file *. bin) and also reinstate the backup file to the printer, and also reset kekembali All relevant manufacturing EEPROM like setting.
For those who wait and watch resetter for these types of direct bolah resetter you try this.
If you want to try to direct you can download at:

* Download (version 0.8.0a)
* Web resources (version 0.9.2)

To note in its use may be known that Canon printer has three working modes: the normal mode, service mode, and the latter is a low-level mode.
Kalu normal mode normal mode works when the printer is operating normally, while the service working as operasioanl mode service mode (by pressing certain Button2 will enter service mode). and the last is the low level mode, the last mode to work on the EEPROM. That the third mode is needed when using this MPTool software for EEPROM operations.
To enter the low mode of procedure is almost the same level as entrance into the fashion ‘service mode’ ie with steps pressing certain buttons in sequence the following sequence:

* Turn off the printer (unplug power)
* Tekandan hold power button printers
* Connect the printer power cable
* Press and release the resume button
* Release the power button (if there is new hardware detection, install the printer driver, will be detected as “Canon MP XXX Low-Level Mode”)